Deciphering Jack Analysis Bar by Bar ll
- Thread starter workwithus
- Start date
If annotate the rtl's from b57 thru b59 should have a BO T1 on b60.Then start from b60 forward the sequence that goes from there. http://screencast.com/t/8O0dtTa7wI
For b60 thru b63 to have a PP1 requires acceleration.The internal on b61 is ok with a PP1.Do you have acceleration? Take difference between b60 and b62 then add this difference plus 1 contract to b62 volume ( i get 22310).See if have that number or higher on b63 (18257).If do have then you have acceleration.If not then no acceleration and PP1 on b63.It would be what jack calls a NOT PP1.One of the A band EE's"(Ac) requires a "not PP1" plus another requirement (HVBO) to trigger after a not PP1.So anytime you get a not PP1 be on alert for this EE to maybe trigger. http://screencast.com/t/tOvJncISkxYF
I must be tired...apologies.
One last try.
If I've dealt with 78 correctly, would 79 be a T2F ?
thx for your patience and feedback
http://screencast.com/t/OGCcpkX3cB
No problems.This is how you will really learn to annotate getting some feedback.In reference to b79 why don't you squish b78 with b76 and see what you get first.Also double check the bar Ba triggered on. This may effect the BM REV you have annotated on the next bar after the Ba.These things will change your end of day.One more thing that should get you thinking.Did the b70 (first P2) volume fall inside the volume range of the two previous T1's on b68 and b69? If so isn't this an EE? If it's an EE than how do you handle the two level assignment on the OB on b70?
Squished 78.
Corrected 75 (Ba) BM
PP2'd 70
I'll need to create my own "kill"..."do not post after 3am GMT..."
thx:
Edited
http://screencast.com/t/DfxjGhzA9QPJ
Tell me about it.Ok look again at b70.You got the PP2 correct.So that is the upper level correct? How do you handle PPx assignments usually? The next measurable bar? level? Also if it's a P1/T1 would this not trigger another EE on the same bar? Which EE? What kind of setup with an OB involved always trigger the PP4? Is this that kind of setup?
I'm working on two versions for today.Here's one where i annotate on b63 a PP1d.Even though i have never seen a PP1d annotated by jack it seems b60 thru b63 fit the bill.So here is that version.By the way your currently doing the other version. http://screencast.com/t/PAse4HQX
Attachments
Check this out in relation to b70 Ob today.This is the only thing i can find in jack's charts. I get the PP2 it's the same as today.I not sure about the PP5b. How do we get to P2/P1? Hmm.The only way i see it is if you assign a first P2 to upper level (this triggers the PP2) and then assign the P1 to lower level so get a PP5b? Very tough stuff. http://screencast.com/t/yNKTcqvOj5W