GBA's "2021 Stock Phantasma"

--
also IPV. stoney i also tossed my hat into this one before spacs plummeted, but today is the vote i think and tomorrow the merger? we might be able to get out of this one alive if it keeps rebounding.

---

God love ya janes--- I have two SPAC's: IPV & BFT and yes totally- the name change and away we go-- it's just these idiots raining on our parade with too many new SPAC's. That and the correction in tech.

--

Ok NOT going to the VET I canceled. Cancel culture. I got wet feet I mean if they do a blood test it's going to look bad and they are going to tell me it's IBD and $5,ooo later I'll be changing the colleges we are considering. So I'm going to go under the assumption that he slid back into the stomach virus and he was just barely getting by and then i too quickly went off the white diet and even gave him fatty duck as a treat last night..maybe it's my fault and not grain allergy. Going to try and ride this out. Go next week if I have to.-

--

CNBC has two Najarians Pete and I forget. John? So one of them panicked and sold everything at the low (I saw) and his brother was just on and he bought everything and rotated. One was heavily into tech one was better balanced... One is now on TV and the other isn't. We all have these two brothers inside us fighting it out every day...
 
Li Auto initiated with a Buy at Needham 08:18 LI Needham analyst Vincent Yu initiated coverage of Li Auto with a Buy rating and $37 price target. The analyst is positive on the company's "differentiated" EV products and relatively higher margins. Yu also states that Li Auto's "unique value proposition", focused strategy, and "diligent" margin and costs control, make the stock a "quality asset" in the growing electric vehicle space, further adding that China EV market has seen double-digit increases in monthly sales since May 2020 while China government targets a 20% EV penetration of the auto market by 2025. Show Related
 
Capstone Turbine pops after securing first microturbine order for clean energy
Mar. 11, 2021 12:37 PM ETCapstone Turbine Corporation (CPST)
Capstone Turbine(CPST+3.3%)has receivedits first commercial order for Capstone microturbine kit immediately after the OEM deal signed withEuropean clean energy company, B+K.
  • The Capstone microturbines will be integrated into the innovative B+K ClinX product, which provides environmentally-friendly solution as customers convert energy from renewable energy sources instead of fossil fuels.
  • Founded in 2012, B+K develops decentralized combined heat and power (CHP) systems based on microturbine technology.
  • "In addition to supplying microturbine kits to B+K, Capstone's factory project team will support the sale of the ClinX solution with its new Direct Sales organization and with our existing global Distribution network," said Capstone's Chief Revenue Officer Jim Crouse.
  • Previously (Feb. 10):Capstone Turbine tumbles on big quarterly loss, lack of guidance
 
Desktop Metal co-creates 'breakthrough' powder for 3D printed aluminum
Mar. 11, 2021 12:26 PM ETDesktop Metal, Inc. (DM)
  • Desktop Metal(NYSE:DM)and additive manufacturing company Uniformity Labs developing a "breakthrough powder" aluminum sintering for binder jetting AM technology.
  • Binder jetting is a 3D printing process where a liquid binding agent is applied to a powder material to create a series of bonded layers until a part is formed.
  • The new powder from Desktop Metal and Uniformity Labs is "a low-cost, raw material yielding fully dense, sinterable 6061 aluminum with greater than ten percent (10%) elongation and improved yield strength (YS) and ultimate tensile strength (UTS) versus wrought 6061 aluminum with comparable heat treatment."
  • Prior techniques for sintering aluminum involved coating the powder particles, mixing in sintering aids, using expensive binders, or the addition of other metals like tin or lead.
  • Sinterable 6061 aluminum with better than wrought strength is highly appealing for the automotive, aerospace, and consumer electronics industries.
  • Once fully qualified, Uniformity 6061 aluminum will be available for use with the Desktop Metal Production System platform.
  • “The introduction of lightweight metals to binder jetting opens the door to a wide variety of thermal and structural applications across industries,” says Adam Hopkins, founder and CEO of Uniformity Labs. “This innovation is a key step towards the adoption of mass-produced printed aluminum parts.”
  • Desktop Metal shares are up over 10%. 3D printing peers on the move: Stratasys(SSYS+10.0%), 3D Systems(DDD+10.9%), ExOne(XONE+6.6%), Proto Labs(PRLB+7.0%), and Voxeljet(VJET+9.6%).
 
I hope I made the right decision but my dog is lying here peaceful these pills help but what happens when I run out- Vet for sure. I should of given him the whole bottle to start I stopped after 3 days....

MYOMO-

Here is a snippit from MYO earnings CC-- talks about market size etc... This company is giving people arms I felt really good about investing in it but it has got tied up in this selloff. I'm not sure where I got in it's at the hedge fund (unfortiunately) maybe $14? $12.50 Now


We're talking about the current chronic arm Paralysis prevalence pool in the United States is about 3 million. As you described, we narrowed down, you've got to be living at home. You're not in a nursing facility, have to have the right type of insurance plan. You have to be clinically qualified. You have to be interested in wearing a robotic device like this. So we narrowed down to about 10% of addressable markets. So our estimate, that's probably 300,000 individuals, right? And we're just serving a couple of hundred a year right now. So certainly, a lot of upside potential there. And then probably 10% of those new incidences every year. So 25,000 to 30,000 from those strokes, spinal cord injuries, new brachial plexus injuries, from traffic accidents, things like that. So that's what we identify as our target market just in the United States. And then, of course, it's probably that large in Europe and in places like China. The reason we wanted to address that market is there's 14 million paralyzed arms in China. A 2.5 million strokes a year. So another 800,000 new cases going to the chronic condition every year. So that's our view of this addressable market for us./////

A COUPLE HUNDRED ROBOT ARMS A YEAR NOW.....
POTENTIALLY EUROPE ALREADY IN GERMANY....
ADD IN CHINA!

AND A COMPANY THAT IS POSTING A LOSS SWINGS TO A PROFIT...
 
INGR-$92.60

Ingredion Fabulous set up... breaking out of a 1 year high... But look back 5 years! Lots of room to run.

1 year only up 11% so you have a true B/O- NOT EXTENDED- in the right area... Bingo-!

This is going to $124.
 
THIS IS FOR YOU VAN!

Hey My Theresa I give these great ideas you are supposed to give me the buy......

Hey gues what Byatches!b Stoney is Back!!!!!!!!

Rekor Systems, Inc. (REKR)

$17.69+1.62 (+10.08%)<------------- Always follow me.... 80% of the time you win!
As of 1:21PM EST.
 
You must log in or register to reply here.
Back
Top