Data Recovery

Quote from FredBloggs:

ooops - m/c = machine. ie my pc.
Hmmm, even with that knowledge I'm still having trouble parsing this "can i look at the old m/c drive contents by creating a network rather than ripping my new m/c open and installing fubar drives? "

If you are asking if you can read the failed/failing drive in an external drive enclosure attached to another (working) PC via USB/firewire I would say yes but certain data recovery software may not be able to access it. Personally I would stick it in a working PC as a secondary drive so you can really see what is going on with the drive.
 
Quote from winter:

Hmmm, even with that knowledge I'm still having trouble parsing this "can i look at the old m/c drive contents by creating a network rather than ripping my new m/c open and installing fubar drives? "

If you are asking if you can read the failed/failing drive in an external drive enclosure attached to another (working) PC via USB/firewire I would say yes but certain data recovery software may not be able to access it. Personally I would stick it in a working PC as a secondary drive so you can really see what is going on with the drive.

I have done this and it worked in my case. Just connected the drive via USB and used software I downloaded from www.runtime.org. You can use the software for free to see what is recoverable then you have to pay to recover it.
 
Quote from winter:

Hmmm, even with that knowledge I'm still having trouble parsing this "can i look at the old m/c drive contents by creating a network rather than ripping my new m/c open and installing fubar drives? "

If you are asking if you can read the failed/failing drive in an external drive enclosure attached to another (working) PC via USB/firewire I would say yes but certain data recovery software may not be able to access it. Personally I would stick it in a working PC as a secondary drive so you can really see what is going on with the drive.

yes - thats what i was thinking of doing - but with some old cat 5 (ethernet) cable in the nic cards.
 
Quote from macaw:

I have done this and it worked in my case. Just connected the drive via USB and used software I downloaded from www.runtime.org. You can use the software for free to see what is recoverable then you have to pay to recover it.

If you make on a regular basis a disk image on a second hard drisk, you will never get in trouble anymore. For less than 50 $ your problem is solved for ever. Altough you might still miss some data.
If you make every week a copy you will always have thta data and you only need to add the changes since the last image was made. Even if you get a virus: just put back the last image aand all the viruses will be gone.
The image restores all the setting from windows.

Things could be so easy....
 
Quote from FredBloggs:

thanx for the reply.

i am only trying to recover basic ms office type files.

as i only have xp, how do i create an nt disk?
Fred,

Sorry. I should have pointed out that XP is NT, it used to be called NT before but internally many names still say 'NT'.
 
Quote from nononsense:

Hi Fred,

You could try with a NT boot diskette.
How to?
(1) start with a diskette formatted with NT-format
(2) copy from your system partition on HD (I suppose C: ) the following files onto this diskette:
boot.ini
NTDETECT.COM
ntldr
(3) reboot from this diskette. This should (could) restart your NT.

PS: better always have a well tested boot diskette ready rather than having to put one together at critical times.

XP install CD will help provided you followed the instructions for making emergency backup diskettes as explained in the docs. If you didn't, this may not help too much.

You could always try a fresh install of a new NT on a DIFFERENT partition. If everything goes well, you can then pick up whatever you want to retrieve from the old XP system. If you are not too sure about partitioning disk, it may be wise to first recover your data onto another medium.

Other possibility, boot from a Koppix linux CD. This does not require an HD install of linux. Once you are in knoppix, you should see the NT partition with its contents and start saving onto any available secondary medium from thereon.

Good luck with recovering your data (and system?).
nononsense

PS: as catastrophic event will ALWAYS sometime occur, plan ahead by always having disk image backup copies ready. This enables you to restore the image and get going again.

cheers nononsense - i have a boot drive, but it has none of those files on it. i cant see any to copy either from what i can see on the c:

guess im fucked big style

im going for the reinstall tonight. if you have any other ideas im all ears (or eyes!!)

fingers crossed!
 
http://www.data-recovery-software.net/


rstudio is the bees knees.

I had a hard drive that would work for an hour before (I guess, overheating?) not working.

Hooked it up as a second drive, and over a four day period I imaged a quarter of it at a time using the imaging by sector tool. And hey presto I got 100% recovery.

Saved me a lot of tears :)
 
Quote from FredBloggs:

cheers nononsense - i have a boot drive, but it has none of those files on it. i cant see any to copy either from what i can see on the c:

guess im fucked big style

im going for the reinstall tonight. if you have any other ideas im all ears (or eyes!!)

fingers crossed!
Hi fred,

In your initial post you wrote: "i can get a c: prompt though."
So I assume that you must have got a DOS running somehow?
If your HD boot partition is the same as this C: you are seeing, you MUST see these few critical NT files for XP being able to boot. Copying these to a 'boot' diskette should get XP running.

If you don't see these files, either your HD was set up differently, or something grave happened.

If you got DOS going, perhaps through booting DOS from DOS diskettes, you could try to get more information by running fdisk. This could be dangerous though if you first did not read and understand its workings.

Perhaps a safer quick way would be to get Knoppix (free: http://www.knoppix.org/ --- pick the right mirror) and burn yourself a livecd. You'll boot up in linux without installing on your HD. The Knoppix KDE file manager should show you the M$ partitions as well, this in case anything sensible is left on your HD. This if you badly need to recover something valuable. Best is to get help from sombody with experience. There are many ways you can go wrong.

Of course, kind of like funster says, you could always hook up another HD (I suggest to temporarily disconnect your current drive). Install a new XP on this drive and when you get it running, connect the old HD again - watch for correct drive hardware ID setting. After that, you should also see your old partitions in this new XP setup and recover these to your new disk.

Good luck Fred,
nononsense
 
cheers nononsense.

the c: i can get is after loading up the dell utilities disk. god knows what i am seeing!!

i can do a dir comand and see a few files only.

i have tried to reinstall xp and use the recovery option but it askes for the admin password. any idea what this may be or should i call dell? i tried my computer password but no joy.

may burn myself that cd.....

thanx.
 
Quote from FredBloggs:

cheers nononsense.

the c: i can get is after loading up the dell utilities disk. god knows what i am seeing!!

i can do a dir comand and see a few files only.

i have tried to reinstall xp and use the recovery option but it askes for the admin password. any idea what this may be or should i call dell? i tried my computer password but no joy.

may burn myself that cd.....

thanx.
Fred,

There is no way NT(XP) can start without these few files that I indicated above. They are either gone, or you are looking at another partition altogether. Remember, DOS will call anytrhing C: but this may not necessarily correspond to the letter in XP.
The knoppix linux cd should show you all partitions (left?) on your HD. If knoppix sees these XP partitions, it should be able to access these without any passwords.
 
Back
Top